Releases

Help / The settings, one by one / Stream Relay

Stream Relay

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

With Stream Relay, the chosen channels are no longer played directly from the tuner, but through the relay: a service that receives the channel, decodes it and passes it on on its port. The TV then plays the relay's stream like an ordinary channel, with its teletext, subtitles and tracks; the info bar, the guide and the channel list show the ordinary channel.

This screen has the relay settings: where it runs (address and port), how long it waits when the channel changes, whether other devices on the home network may ask for streams and whether some channels go through the relay by themselves.

The channels are not chosen here, but from the channel list: MENU on a channel > Add to Stream Relay (or Remove from Stream Relay), or from the Channels page of the web interface, with the SR button.

Above the explanation of each row, the screen shows the current status: how many channels the list has, whether the relay answers and, if not, why.

If the relay does not answer, a channel from the list starts directly, as without Stream Relay. The same settings are in the web interface, on the /setari?id=hds_stream_relay page.

How to get here

Path: Main menu > Settings > Conditional access > Stream Relay (the third row).

Keys on the remote: MENU 6 6 3.

In the web interface: the /setari?id=hds_stream_relay page; on the Channels page, the SR button next to the star adds a channel to the list or removes it.

What you see on the screen

At the top, the title “Stream Relay”.

The list of rows, each with its value on the right: “Automatic relay for ICAM channels”, “Relay address”, “Relay port”, “Delay when changing channel (ms)”, “Streams for other devices on the home network” and, only at the Expert level, “Systems for the automatic relay”.

Below a line, the current status and, below it, the explanation of the selected row. The status has lines such as “Stream Relay list: 3 channels.”, “Channels with ICAM (098C, 098D) go through the relay by themselves.”, “Going through the relay by themselves: 12 channels.”, “Stream Relay responds at 127.0.0.1:17999.” or the reason it does not answer, then “Add channels from the channel list (MENU on a channel > Add to Stream Relay) or from the web interface's Channels page (SR button).”

With an empty list and without the automatic relay, the status says “The Stream Relay list is empty, so no channels are routed through the relay.”

At the bottom, the colour keys: RED “Cancel” and GREEN “Save”.

Rows and settings

RowValuesDefaultWhat it does
Automatic relay for ICAM channelsyes, noyesWith “yes”, the channels with ICAM (the 098C and 098D systems, Sky Deutschland) go through the relay by themselves, without you adding them to the list. A channel that the channel list does not know yet starts directly the first time, goes through the relay a moment later and is remembered. Channels that also have other systems do not go by themselves; you add them from their menu (Add to Stream Relay). If the relay does not answer, these channels start directly, without a message. A channel is removed from its menu (Remove from Stream Relay). With “no”, only the channels in the list go through the relay. Choose “no” when you do not want any channel to go through the relay without choosing it yourself.
Systems for the automatic relaythe system codes (CAID), separated by commas098C,098DThe access system codes of the channels that go through the relay by themselves. Empty or wrong: the factory ones. The row is shown only at the Expert level.
Relay addresshttp://127.0.0.1:17999 (this receiver), the address of a device on the home networkhttp://127.0.0.1:17999Where the relay runs: on this receiver (127.0.0.1) or on another device on the home network, if the “Streams for other devices on the home network” row is on. Only the address is taken; the port is in the next row. Any other address is not used: the channels start directly. Only when the relay runs on another device at home.
Relay porta number17999The port on which the relay gives the decoded channels. If the relay does not answer, the channel starts directly, as without Stream Relay. When your relay uses another port.
Delay when changing channel (ms)milliseconds50How long the receiver waits, from one channel through the relay to another, for the relay to let go of the old channel. When the picture does not start as you go from one channel through the relay to another.
Streams for other devices on the home networkyes, noyesWith “yes”, the channel streams can also be requested by devices on the home network (addresses 192.168.x.x, 10.x.x.x, 172.16-31.x.x, 169.254.x.x): the players at home, phone apps, a Stream Relay relay on another receiver. From the internet, never. With “no”, the streams stay on this receiver only. Choose “no” if you do not want other devices at home to take streams from the receiver.
The status (above the explanation)Stream Relay responds at ..., Stream Relay does not answer at ..., No access module is running..., Access module ... is not running..., Access module ... is running, but does not provide Stream Relay on port ...What the receiver sees now: how many channels the list has, how many go by themselves, whether the relay answers and, if not, the cause: no access module chosen, the chosen module is not running, the module is running but does not provide the relay on the port, or the address and port that do not answer. The status is read again every few seconds.

Keys

UP / DOWNMove the cursor to another row; the status and the explanation change with the selected row.
LEFT / RIGHTOn a yes / no row: change the value.
OKOn a yes / no row: switches to the other value. On “Relay address” and “Systems for the automatic relay”: opens the on-screen keyboard.
Digits 0-9On “Relay port” and on the delay: type the number.
GREEN (Save)Keeps the settings and closes the screen.
RED (Cancel) or EXITCloses without saving. If you changed something, it first asks “Really close without saving settings?”.
HELPOpens this help page.

Step by step

Adding a channel to Stream Relay

  1. Open the channel list and move the cursor to the channel.
  2. Press MENU and choose “Add to Stream Relay”.
  3. Start the channel: it now goes through the relay. In the Stream Relay screen (MENU 6 6 3), the status shows the list and whether the relay answers.

Finding out why a channel from the list starts directly

  1. Press MENU 6 6 3.
  2. Read the status above the explanation: it says whether the relay answers and, if not, why (for example “No access module is running...”).
  3. Do what the message says, then start the channel again.

Problems and solutions

The status says “No access module is running, so Stream Relay is not responding.”

On the receiver, the relay is provided by the access module. Choose and start one in Menu > Conditional access.

The status says “Access module ... is not running...”.

Start the chosen module from Menu > Conditional access or from the Conditional access modules web page.

The status says “Access module ... is running, but does not provide Stream Relay on port ...”.

Enable Stream Relay in the module settings, or enter here, in “Relay port”, the port it uses.

The status says “Stream Relay does not answer at ...”.

Check “Relay address” and “Relay port”. For a relay on another device at home, “Streams for other devices on the home network” must be set to “yes”.

The TV shows “The channel starts without Stream Relay.” together with the reason.

The relay did not answer, so a channel from the list started directly. The message closes by itself; you can also see the reason in the status on this screen.

The status says “The Stream Relay list cannot be read; the previous list is kept.”

The list file could not be read, so the receiver uses the list in memory and does not write over the file.

A channel goes through the relay by itself and I do not want that.

In the channel list, MENU on the channel > Remove from Stream Relay. So that no channel goes by itself any more, set “Automatic relay for ICAM channels” to “no”.

Related topics