Picture format
Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.
What it is for
“Picture format” tells the receiver the shape of the TV screen (16:9 or 4:3) and a few settings of the video output: the WSS signal, the picture sharpness and, on receivers that have them, the analogue colour format, the TV system and SCART switching.
Resolution and refresh rate are not here, but in Advanced Video Setup; that is also where you choose what happens to 4:3 programmes.
The screen shows only the rows that can change something on your receiver: “Color Format” and “TV System” are missing where they have no effect.
The same rows are in the web interface, on the /setari?id=hds_imagine_tv page.
How to get here
Path: Main menu > Settings > Video & Display Settings > Picture format (the second row).
Keys on the remote: MENU 6 1 2.
In the web interface: the /setari?id=hds_imagine_tv page (titled “Picture format”).
What you see on the screen
At the top, the title “Picture format”.
The list of rows, each with its value on the right. With “Setup Mode” set to Simple only “Aspect Ratio” is shown (and, where they exist, “Color Format” and “TV System”); with Intermediate, the factory setting, also “WSS on 4:3”, “Picture sharpness” and, where it exists, “Auto scart switching”.
Below a line, the explanation of the selected row, for the rows that have one (for example “Aspect Ratio”).
At the bottom, the colour keys: RED “Cancel” and GREEN “Save”.
Rows and settings
| Row | Values | Default | What it does |
|---|---|---|---|
| Color Format | CVBS, RGB, S-Video | RGB | The kind of signal on the receiver's analogue video output. The row appears only on receivers where the setting really changes something; on those without an adjustable analogue output it is missing. When the TV connected to the analogue output needs another kind of signal. |
| Aspect Ratio | 4:3 Letterbox, 4:3 PanScan, 16:9, 16:9 always, 16:10 Letterbox, 16:10 PanScan, 16:9 Letterbox | 16:9 always | The shape of the TV screen: 16:9 for today's wide TVs, 4:3 for old ones. With “16:9 always” the picture always goes out in wide format. What happens to 4:3 programmes is chosen in Advanced Video Setup, under the 4:3 picture row. When you have a 4:3 or 16:10 TV. |
| TV System | PAL, NTSC, multinorm | PAL | The colour system of the video signal. The row appears only on receivers that do not give their own list of video modes; on the others the mode is chosen in Advanced Video Setup. Only when the TV needs NTSC. |
| WSS on 4:3 | enable, disable | enable | Sends the TV, on the analogue output, the WSS signal, which tells it the picture shape for 4:3 programmes, so it can adjust by itself. The row is shown at the Intermediate and Expert levels. When the TV changes its format by itself and you do not want that. |
| Auto scart switching | enable, disable | disable | Automatic switching of the SCART socket. The row appears only on receivers that have a SCART switch, at the Intermediate and Expert levels. |
| Picture sharpness | 0 ... 26 | 13 | The sharpness of the picture when the video chip enlarges or reduces it: towards 0 softer, towards 26 sharper. The row appears only on receivers that have this adjustment, at the Intermediate and Expert levels. When the picture looks washed out or, on the contrary, has edges that are too hard. |
Keys
| UP / DOWN | Move the cursor to another row. |
| LEFT / RIGHT | Change the value of the selected row; on “Picture sharpness” they move the slider. |
| OK | Moves the selected row to its next value. |
| MENU | On a row with values to choose from: opens the list of all values. |
| GREEN (Save) | Keeps the settings and closes the screen. |
| RED (Cancel) or EXIT | Closes without saving. If you changed something, it first asks “Really close without saving settings?”; with Yes the values go back to what they were. |
| HELP | Opens this help page. |
Step by step
Telling the receiver you have an old 4:3 TV
- Press MENU 6 1 2.
- On “Aspect Ratio” press MENU and choose “4:3 Letterbox” or “4:3 PanScan”.
- Press GREEN.
Making the picture a little sharper
- Press MENU 6 1 2 and move the cursor to “Picture sharpness”.
- Press RIGHT one step at a time and watch the picture.
- Press GREEN when you like it; with RED you go back to what it was.
Problems and solutions
I do not see the “Color Format” or “TV System” rows.
On your receiver they change nothing, so they are not shown. You choose the resolution and refresh rate in Advanced Video Setup.
I do not see “WSS on 4:3” and “Picture sharpness”.
These rows are shown at the Intermediate or Expert level. Set “Setup Mode” to Intermediate in OSD Preferences. “Picture sharpness” is also missing on receivers that do not have this adjustment.
4:3 programmes appear stretched or cut off.
Check here that “Aspect Ratio” matches your TV, then choose how 4:3 programmes are shown in Advanced Video Setup.
I changed something, the picture changed, but after leaving it went back.
The change is shown immediately, as a preview, but it is kept only after GREEN (Save).
Related topics
- Video & Display Settings (the submenu)
- Advanced Video Setup
- Picture quality
- OSD Preferences (Setup Mode)
- Matching web page: /setari?id=hds_imagine_tv.
Differences between receivers
“Color Format”, “TV System”, “Auto scart switching” and “Picture sharpness” appear only on receivers whose driver has that adjustment; on a receiver with an HDMI output only, usually “Aspect Ratio” and “WSS on 4:3” remain.