Releases

Help / The settings, one by one / Disk mounting

Disk mounting

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

“Disk mounting” shows every USB stick, USB or SATA hard disk and SD card, with its place under /media, and lets you choose the place: Automatic, /media/hdd, /media/usb, /media/usb2..., /media/mmc or the disk's label name.

From here you also unmount a disk to remove it safely and mount it again.

Nothing to confirm: the choice applies at once and stays after a restart. When a disk moves to another place, the recording folders and the TV guide location follow it.

How to get here

Path: Main menu > Settings > Recording & Storage Setup > Disk mounting (the third row).

Keys on the remote: MENU 6 3 3.

In the web interface: the /montare-discuri page.

What you see on the screen

A window titled “Disk mounting”; when it opens, briefly, “Reading disk information...”.

Then one row per disk: the name, the size and the status (“Mounted at /media/hdd”, “Unmounted. You can safely remove the disk.”).

Below the list, for the chosen disk: the status, “File system: …” and “Chosen location: …”; underneath, the note about OK.

Rows and settings

RowValuesDefaultWhat it does
The list opened with OKAutomatic (first free name), Mount at /media/hdd, Mount at /media/usb, Mount at /media/mmc, Mount at <the disk label>, Unmount (you can safely remove the disk), Mount againAutomatic (first free name)The mount place of the chosen disk; the current place has “(chosen now)”. “Unmount” appears only for a mounted disk, “Mount again” only for an unmounted one. When you want a particular disk to always be /media/hdd (for recordings) or when you want to remove it.

Keys

UP / DOWNChoose the disk.
OKOpens the list of places, with Unmount or Mount again.
EXITCloses the screen.
HELPOpens this help page.

Step by step

Removing the disk safely

  1. Open “Disk mounting” (MENU 6 3 3) and move the cursor to the disk.
  2. Press OK and choose “Unmount (you can safely remove the disk)”.
  3. At “The disk has been unmounted. You can safely remove it.”, remove the disk.

Making a particular disk /media/hdd

  1. Move the cursor to the disk you want the recordings on and press OK.
  2. Choose “Mount at /media/hdd”. The choice stays after a restart.

Problems and solutions

The message “A recording or timeshift is writing to this disk now.”

The disk is not unmounted while something writes to it; try after the recording finishes or stop timeshift.

The message “Disk does not respond in time. Try again.”

The disk is slow to start or has a problem. Wait a few seconds and open the screen again; if it repeats, check the disk in Recording & Storage Setup.

The message “No hard disk and no USB stick found.”

Connect the disk or the stick and wait a few seconds: the list refreshes by itself.

Related topics

Differences between receivers

Since 0.7.5, the same on all receivers. An unmounted SD card is mounted again only after you take it out and put it back.