Releases

Help / The settings, one by one / Interface resolution

Interface resolution

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

“Interface resolution” chooses how finely the receiver draws the HD Satelit theme menus on the TV: 1080p (1920x1080), as before, or 2K (2560x1440), with sharper text and images on 2K and 4K TVs.

The theme stays the same; in 2K the receiver draws it larger, so the layout of the screens does not change. The choice only matters with the HD Satelit theme: a third-party theme sets its own resolution.

The new resolution takes effect after the interface restarts. If 2K does not start (the board driver refuses 2560x1440 or the interface stops while starting), the receiver goes back to 1080p by itself and tells you why, once.

How to get here

Path: Main menu > Settings > Interface & Appearance > Interface resolution (the fourth row; from 0.7.7, the fifth).

Keys on the remote: MENU 6 4 5 (in 0.7.6: MENU 6 4 4).

The row appears only on receivers that can do 2K (the right graphics driver and enough video memory, for example the Amiko Viper 4K V20). On the others the row is missing, and the rows below it in Interface & Appearance move up by one.

In the web interface: the /tema-tv page, the “Interface resolution” part, where you also choose whether it applies now (with an interface restart) or at the next start.

What you see on the screen

A choice window titled “Interface resolution”. At the top, a sentence: “Sharper text and images on 2K and 4K TVs.” or, after a return to 1080p, the reason for it.

Two rows: “1080p (1920x1080)” and “2K (2560x1440)”. The row chosen now has “(selected)” after its name, and the cursor is on it.

After OK on the other row: “The selected resolution takes effect after the interface restarts.” and the question “Restart the interface now?”.

Rows and settings

RowValuesDefaultWhat it does
1080p (1920x1080)yes, chosen by defaultThe standard resolution of the HD Satelit theme. When 2K does not look good on your TV or you want back what you had.
2K (2560x1440)Sharper text and images on 2K and 4K TVs. When you have a 2K or 4K TV and want clearer letters.

Keys

UP / DOWNMove the cursor to the other row.
OKChooses the resolution; then comes the question about restarting the interface.
EXITCloses without changing anything.
HELPOpens this help page.

Step by step

Switching the interface to 2K

  1. Open “Interface resolution” (MENU 6 4 4).
  2. Move the cursor to “2K (2560x1440)” and press OK.
  3. At “Restart the interface now?” choose Yes. After a few seconds the menus appear in 2K.

Problems and solutions

I do not have the “Interface resolution” row.

The receiver cannot do 2K: its graphics driver or video memory is not enough. The interface stays at 1080p, which looks good on any TV.

I chose 2K, but after the restart the menus are still 1080p.

The receiver went back to 1080p by itself and told you the reason once, for example “The receiver's graphics driver does not support 2K, so the interface stayed at 1080p.” The reason also shows at the top of the choice window.

I chose 2K and answered No to the restart.

The choice is kept and applies at the next start of the interface or the receiver.

I use a third-party theme and the choice changes nothing.

The resolution is chosen here only for the HD Satelit theme; a third-party theme has its own resolution.

Related topics

Differences between receivers

Since 0.7.5, 2K can be chosen on HiSilicon receivers with the graphics driver patched by the image and enough video memory, for example the Amiko Viper 4K V20. On Vu+, Edision and the other Broadcom boards the row does not appear for now.