Releases

Help / The settings, one by one / Conditional access modules

Conditional access modules

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

“Conditional access modules” shows the programs installed on the receiver that open encrypted channels (the access modules and, if you added any, the card servers) and lets you choose which one the receiver starts.

Each row shows whether the module is selected (it starts every time the receiver starts) and whether it is running now. From here you select, start, stop or restart it, with the colour keys or with OK alone.

Below the list are the details of the chosen row: the description, the memory used, the address of its web interface and what it is decrypting now. For a module that cannot start, the details say why in one sentence: the program is missing, it has no execute permission, it is made for another processor or a library is missing.

Here you also find the modules in the HD Satelit feed that are not installed yet (one OK installs, selects and starts them) and, at the end of the list, the “Download public keys (SoftCam.Key)” row.

The image has no lines, servers or access data: the modules and their settings are yours. The screen does not read or change anything in the module's configuration; what you can do in the module's own page is up to that page.

How to get here

Path: Main menu > Settings > Conditional access > Conditional access modules (the first row).

Keys on the remote: MENU 6 6 1.

The “Conditional access” submenu (MENU 6 6) has the rows “Conditional access modules”, “Decryption information”, “Stream Relay”, “Common Interface” (only on receivers with a CI slot) and “Parental Lock”. The HELP key in “Decryption information” also opens this page.

In the web interface: the /acces-conditionat page, with the same modules, starting and stopping them, the public keys, what is being decrypted now and the link to their web interfaces.

What you see on the screen

At the top, the title “Conditional access modules”.

The list: first “None”, then each installed module, with its name and version and, in brackets, “selected”, “running” or “stopped”. Card servers, only when one is installed, have “Card server:” in front.

Below the installed modules, one “Install … from the HD Satelit feed” row for each module in our feed that is not installed.

At the end of the list, read-only rows: a module started by another program (“Now running: … (started by another program)”) and the CI module in each slot (“CI module in slot 1: …”). The last row is “Download public keys (SoftCam.Key)”, with the date of the last download or “not downloaded yet”.

Below the list, a yellow line with the progress of the last command (for example “… started.” or “Please wait for the current command to finish.”), then the details of the chosen row: the description, “Running (PID …)”, the memory and the threads, “Web interface: …” with its address, “Starts every time the receiver starts.”, “Current decryption” and the Stream Relay status.

At the bottom, the colour keys: RED “Stop”, GREEN “Start” or “Choose”, YELLOW “Restart”, BLUE “Web interface”. On the public keys row: GREEN “Download keys” and YELLOW “Change address”.

“Decryption information” (INFO here, or MENU 6 6 2) shows the running module, its memory, what it is decrypting now, its readers and clients and the last lines of its log. There GREEN is “Update”, and RED, OK or EXIT close it; UP and DOWN scroll.

Rows and settings

RowValuesDefaultWhat it does
NoneGREEN or OK here: no module starts any more when the receiver starts (“No module starts when the receiver starts.”). When you want no module to start by itself, for example to try another one started by hand.
An installed module (name and version)selected, running, stoppedGREEN selects and starts it; from now on it starts every time the receiver starts. RED stops it, YELLOW restarts it, BLUE opens its web interface on the TV. When you switch to another module or after you changed its configuration (YELLOW, so that it reads it).
Install … from the HD Satelit feedOK or GREEN: the receiver installs the module from the HD Satelit feed, selects it and starts it, without going through Plugins. The row's details show the package description and version. When you have no module yet or when the one installed from elsewhere does not start on this receiver.
Now running: … (started by another program)Read-only: a module started by another program (another module manager or a command). It is stopped and restarted from that program; OK or INFO open “Decryption information”.
CI module in slot 1: …Read-only: the CI module in the slot and its state. OK or GREEN open the “Common Interface” screen.
Download public keys (SoftCam.Key)the default addressOK or GREEN (“Download keys”): the receiver downloads the SoftCam.Key file from the address shown in the details, puts it where the installed modules read it and restarts the running module so that it reads the new keys. Nothing is downloaded by itself, only when you press. YELLOW (“Change address”) opens the keyboard with the address; empty means the default address. When channels that use public keys no longer open after a key change. Your previous file stays next to the new one, as a copy.

Keys

UP / DOWNMove the cursor to another row; the details below the list change.
LEFT / RIGHTScroll the details, one page at a time.
OKOn a running module: a short list with “Choose” (when it is not selected), “Stop”, “Restart”, “Web interface” and “About decryption”. On a stopped module or on “None”: like GREEN. On a module that cannot start, the first choice is “Install … from the HD Satelit feed”. On the CI row it opens “Common Interface”, on the keys row it downloads the keys.
GREEN“Choose”: the module on the row becomes the selected one and starts. “Start”: on the module already selected, starts it. On the keys row: “Download keys”.
RED“Stop”: stops the running module. It stays selected, so it starts again when the receiver starts (the message says so).
YELLOW“Restart” the module. On the keys row: “Change address”.
BLUE“Web interface”: opens the web page of the running module on the TV, in the image's browser; when several are running, you choose. With no module started: “No module is running.”
INFOOpens “Decryption information” for the module on the row, if it is running, otherwise for the first one started.
EXITCloses the screen. A command already started carries on, and at the end a short message appears over what is on the screen.
HELPOpens this help page.

Step by step

Choosing the module that starts by itself

  1. Press MENU 6 6 1.
  2. Move the cursor to the module with UP or DOWN.
  3. Press GREEN. The yellow line says the module has started and that it starts every time the receiver starts.

Installing a module from the HD Satelit feed

  1. In the list, move the cursor to the “Install … from the HD Satelit feed” row of the module you want.
  2. Press OK. The receiver installs, selects and starts it; at the end the yellow line says it is installed and started.

Downloading the public keys (SoftCam.Key)

  1. Press DOWN to the last row, “Download public keys (SoftCam.Key)”.
  2. Press OK. The receiver downloads the file, puts it where the modules read it and restarts the running module.
  3. To get them from another address: YELLOW (“Change address”), type the address (http:// or https://) and confirm; empty means the default address.

Seeing the module's web page on the TV

  1. Move the cursor to the running module.
  2. Press BLUE (or OK and “Web interface”). The module's page opens in the image's browser; EXIT closes it.

Problems and solutions

The list has only “None”.

No module is installed. Install one from the HD Satelit feed (the “Install … from the HD Satelit feed” rows, when the receiver has internet) or from Plugins; once installed it appears here by itself.

The selected module says “stopped” and does not start.

The details say why: the program is missing, it has no execute permission, it is made for another processor or a library is missing. Press OK: the first choice installs the same module from the HD Satelit feed, ready to start.

“Please wait for the current command to finish.” appears.

A command (starting, stopping, installing, downloading the keys) is still working. Press again after its message.

A module started by another program cannot be stopped from here.

Its row is read-only: it is stopped and restarted from the program that started it.

The public keys could not be downloaded.

The message says why: the address does not answer (the receiver's internet or the address), the server's certificate is not valid or there is no key file at the address. The old file stays untouched. Check the address with YELLOW or try again later.

BLUE says “No module is running.”

The web interface opens only for a running module: start it first with GREEN.

Related topics

Differences between receivers

The same on all receivers. The CI rows appear only on receivers with a CI slot; the modules in the HD Satelit feed are the ones made for the receiver's processor.

Since 0.7.7: the reason why a module does not start, the “Install … from the HD Satelit feed” rows, the public keys row and, in “Decryption information”, the module's readers, clients and log.