Releases

Help / The settings, one by one / Remote control code

Remote control code

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

“Remote control code” chooses the code the receiver listens to from the remote. When you have two identical receivers in the same room, you set them to different codes, so that each remote controls only its own receiver.

The screen belongs to the receiver's manufacturer: the HD Satelit image opens it as it is, with its rows, saving and confirmations. That is why its texts may appear in English.

The row appears only on receivers whose image has the manufacturer's package for the remote control code.

In the web interface, the /functii-imagine?id=telecomanda page opens the same screen on the TV and changes its rows from the browser.

How to get here

Path: Main menu > Settings > System & Devices > Remote control code (next to Remote controls).

Keys on the remote: MENU 6, then UP until “System & Devices” (twice, or three times when “Remote assistance” is also in the list) and OK, then go down to “Remote control code”.

In the web interface: the /functii-imagine?id=telecomanda page, with the “Open the settings on the TV” button.

What you see on the screen

The manufacturer's settings screen: the title “Remote Control Code”, the list of rows and, at the bottom, the keys “Cancel” (RED) and “Save” (GREEN).

On Vu+ receivers, the rows are “Remote Control Type” (the kind of remote), “Remote Control System Code” (the code, from 1 to 4) and “Text support”. On the GB Trio 4K, a single row, “Remote Control Code:”, with “Code 1” and “Code 2”.

After saving, a question from the manufacturer appears, asking you to switch the remote to the new code as well and giving the key combination: on Vu+ “Please change your remote mode”, with the choices “Keep” and “Restore”; on the GB Trio 4K “Please change now the mode on your RCU.”, with “Confirm”.

Rows and settings

RowValuesDefaultWhat it does
Remote Control Type (Vu+)Legacy Vu+ Universal RCU, New Vu+ Bluetooth RCU, New Vu+ Type 6 RCUdepends on the receiver modelThe kind of Vu+ remote. When you have a different remote from the one that came with the receiver.
Remote Control System Code (Vu+)1, 2, 3, 4The remote control code. When two receivers in the same room respond to the same remote.
Text support (Vu+)A row of the manufacturer; it is kept on Save.
Remote Control Code: (GB Trio 4K)Code 1, Code 2The remote control code. When two receivers in the same room respond to the same remote.
The question after savingKeep, Restore, ConfirmIt asks you to switch the remote to the new code as well (“Please change your remote mode” on Vu+, “Please change now the mode on your RCU.” on the GB Trio 4K), with the keys to hold down, then to choose “Keep” (or “Restore”, on Vu+) or “Confirm” (GB Trio 4K) within a few seconds.

Keys

UP / DOWNMove the cursor to another row.
LEFT / RIGHTChange the value of the selected row.
GREEN (Save)Saves; then the manufacturer's question for the remote appears.
RED (Cancel) or EXITCloses without saving.
HELPOpens this help page.

Step by step

Switching the receiver and the remote to another code

  1. Open “Remote control code” in System & Devices.
  2. Choose the new code (on Vu+, first check the “Remote Control Type” row) and press GREEN.
  3. On the remote, do the key combination written in the question.
  4. Quickly choose “Keep” (or “Confirm”).

Changing the rows from a phone or a computer

  1. Open the /functii-imagine?id=telecomanda page and press “Open the settings on the TV”.
  2. Change the rows on the page; they also change on the TV.
  3. Press “Save” and answer the question on the TV with the remote.

Problems and solutions

The remote no longer controls the receiver after changing the code.

The remote stayed on the old code. Do the key combination from the manufacturer's question on it. Until you sort it out, you can control the receiver from the web interface, on the Remote controls page.

I do not have the “Remote control code” row in the menu.

The row appears only on receivers whose image has the manufacturer's package for the remote control code. On the others, remotes are matched in Remote controls.

The web page says “Open the screen on the TV to use it from this page.”

Press “Open the settings on the TV”; the page can change only the screen it opened itself.

The web page says “Answer the window on the TV with the remote control.”

There is a question from the screen on the TV. Answer it with the remote, then continue on the page.

The web page says “The function is not available on this receiver.”

The receiver does not have the manufacturer's package for the remote control code.

Related topics

Differences between receivers

In the 0.7.0 images, the manufacturer's package for the remote control code was in the images for the Vu+ Solo SE, Vu+ Solo 4K, Vu+ Duo 4K and Vu+ Uno 4K SE (the remote type and codes 1-4) and for the GB Trio 4K (Code 1 and Code 2). Where the image does not have the package, the row is missing.