Display and LED
Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.
What it is for
“Display and LED” opens the manufacturer's screen for the receiver's front display and LEDs: what the display shows, the brightness, the LEDs and the clock in deep standby.
The screen belongs to the receiver's manufacturer: the HD Satelit image opens it as it is, with its rows and saving. That is why its texts may appear in English.
On a receiver with this screen, the display is controlled only by the manufacturer's program; that is why the image's own “Front display” screen does not appear there.
In the web interface, the /functii-imagine?id=afisaj page opens the same screen on the TV and changes its rows from the browser.
How to get here
Path: Main menu > Settings > Interface & Appearance > Display and LED.
Keys on the remote: MENU 6 4, then go down to “Display and LED”.
The row appears only on receivers whose image has the manufacturer's package for the display.
In the web interface: the /functii-imagine?id=afisaj page, with the “Open the settings on the TV” button.
What you see on the screen
The manufacturer's settings screen: the title “GigaBlue Setup”, the list of rows, each with its value on the right, and at the bottom the keys “Cancel” (RED) and “Save” (GREEN); on some models also YELLOW “Update Date/Time”.
The rows depend on the model. The ones the screen can have: “Enable led”, “Led Deep Standby”, “Led state RUN”, “Led state Standby”, “Led state Deep Standby”, “Led state Record”, “Blink Record Led”, “Led state HDD /dev/sda active”, “Led state HDD /dev/sdb active”, “Brightness”, “Brightness Standby”, “Show on VFD”, “Show clock in Deep Standby”, “Time mode” and “Channel number with leading zeros”.
Rows and settings
| Row | Values | Default | What it does |
|---|---|---|---|
| The LED rows | Enable led, Led Deep Standby, Led state RUN, Led state Standby, Led state Deep Standby, Led state Record, Blink Record Led, Led state HDD /dev/sda active, Led state HDD /dev/sdb active | The manufacturer's rows for the LEDs, depending on the model. Among their values, the screen has the colours None, Blue, Red and Purple. | |
| Brightness, Brightness Standby | The brightness of the display, in normal use and in standby. When the display is too bright or too dim. | ||
| Show on VFD | Channelnumber in Standby off, Channelnumber in Standby Clock, Channelnumber/Clock in Standby Clock, Clock always, Always off | What the display shows: the channel number, the clock or nothing, in normal use and in standby. When you want the clock instead of the channel number, or the display off. | |
| Show clock in Deep Standby | The clock on the display in deep standby. | ||
| Time mode | 24h, 12h | The display clock in 24-hour or 12-hour format. | |
| Channel number with leading zeros | The channel number on the display written with zeros in front. |
Keys
| UP / DOWN | Move the cursor to another row. |
| LEFT / RIGHT | Change the value of the selected row. |
| GREEN (Save) | Saves the settings and closes the screen. |
| RED (Cancel) or EXIT | Closes without saving. |
| YELLOW (Update Date/Time) | The manufacturer's key, only on some models. |
| HELP | Opens this help page. |
Step by step
Showing the clock on the display
- Open “Display and LED” in Interface & Appearance.
- Move the cursor to “Show on VFD” and choose “Clock always”.
- Press GREEN.
Problems and solutions
I do not have the “Display and LED” row in the menu.
The row appears only on receivers whose image has the manufacturer's package for the display. On the others, the display is adjusted in “Front display”, where the receiver has a display.
I cannot find the image's “Front display”.
On a receiver with “Display and LED”, the display is controlled only by the manufacturer's program, so that two programs do not write to it at the same time. Adjust it here.
The web page says “Open the screen on the TV to use it from this page.”
Press “Open the settings on the TV”; the page can change only the screen it opened itself.
The web page says “The function is not available on this receiver.”
The receiver does not have the manufacturer's package for the display.
Related topics
- Front display
- Interface & Appearance (the submenu)
- Standby and TV
- Matching web page: /functii-imagine?id=afisaj.
Differences between receivers
In the 0.7.0 images, the manufacturer's package for the display was only in the image for the GB Trio 4K. The rows of the screen differ from one GigaBlue model to another.
On receivers without this screen (for example the SF8008 or the Ustym 4K PRO), what the front display shows in standby (the clock or nothing) is chosen in “Front display”, under “In standby”.