Releases

Help / Your phone and the web interface / The OSCam Retuned web interface

The OSCam Retuned web interface

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

OSCam Retuned, the module you install from Extensions, has its own web page: its status, readers, accounts, log, settings and files.

The page is in your language (all the image's languages), uses the colours of the receiver's web interface and fits any screen, from a phone to a TV.

Every setting has a short help next to it, in your language: what it does, which values it takes and what the factory value is.

How to get here

In the receiver's web interface: the “Conditional access” page (/acces-conditionat), then “The web interfaces of the modules”. The module must be running.

On the TV: from the same web page, the “Open on the TV” button. The page opens in the receiver's browser, and the receiver fills in the user name and password by itself.

The module is started from Main menu > Settings > Conditional access > Conditional access modules (MENU 6 6 1) or from the /acces-conditionat page.

What you see on the screen

At the top, the menu of the module's pages; on a narrow screen it wraps onto several lines, and wide lists scroll inside their frame.

Next to the theme button (light or dark), the language choice. Without a choice, the page takes the browser's language, then English. Technical values (protocols, codes, setting names, file contents) stay unchanged.

States are shown in coloured badges: green works, yellow needs attention, red is an error, grey is off. The colours follow the state, not the text, so they are the same in every language.

Next to every setting, an “i” button in a circle (and the setting's name) opens its help: what it does, how to write it, the factory value, when it helps and what we recommend. On a computer the help sits on the right, on a phone at the bottom.

In the log the lines are shown translated; the “Original (English)” box shows them as the module wrote them.

In the file editor, while you type, a list appears below with what can be written at that place, each with a short explanation.

On a phone, the less used columns of the status page are hidden. At the bottom, in the footer, “Tuning, translation and theme” with the Monea Software link.

Keys

Language choiceTranslates the page at once; the choice is remembered in that browser.
The “i” button or the setting's nameOpens the setting's help.
EscCloses the help.

Step by step

Opening the module's page from a phone

  1. Open the receiver's web interface and go to “Conditional access”.
  2. Press “The web interfaces of the modules” and choose OSCam Retuned.
  3. If the page asks for a user name and password, type the ones from the module's settings.

Putting the page in your language

  1. Next to the theme button, open the language choice.
  2. Choose the language: the page is translated at once and stays that way in that browser.

Finding out what a setting does

  1. Open the module's settings page.
  2. Press the “i” next to the setting or its name.
  3. Read the help and close it with Esc.

Problems and solutions

It says “No module is running now, so there is no web page to open.”

Start the module from MENU 6 6 1 or from the “Conditional access” page, then try again.

Some words stay in English.

Technical values are not translated: protocols, codes, setting names and file contents. If you see something else untranslated, update the module from Extensions (the “Updates” tab).

The page does not fit the screen or is cut off on the right.

Update the module from Extensions: the new version fits any width and zoom, and very wide lists scroll inside their frame.

On a phone I do not see some columns of the status page.

On a narrow screen the less used columns are hidden. Turn the phone sideways or open the page on a computer.

Related topics