Releases

Help / The dish and the channel scan / Channel editor

Channel editor

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

“Channel editor” arranges the bouquets (your channel lists) and the channels in them: you add channels, move them, copy them, delete them from a bouquet, make new bouquets, markers and sub-bouquets, rename, sort, hide or lock channels.

The screen has two columns: on the left the SOURCE (all the receiver's channels, the satellites, the providers, the transponders, the bouquets or the search, with filters), on the right the BOUQUET (the list of bouquets, then the entries of the chosen bouquet).

You work with the remote, but also with a mouse or a keyboard connected to the receiver. Every change can be undone. When saving, the receiver makes a backup copy of the list, which you can go back to from “Backups”.

Besides arranging, MENU has tools for the whole list: duplicates, channels that no longer exist, cleanup, import from a USB stick, writing the list or a bouquet to a stick.

From 0.7.7 you also remove a satellite from the satellite list here: MENU > Advanced > “Delete a satellite from the list…” (or, on the folder of a satellite, MENU > Advanced > “Delete from the satellite list: ...”). The deleted satellite is no longer restored at start and is also removed from the tuners that used it; its channels stay until you delete them.

The same editor is in the web interface, on the /editor-canale page. The list is edited from one place at a time: the TV or a browser.

How to get here

Path: Main menu > Channel scan > Channel editor.

Keys on the remote: MENU 1 5 (MENU 1 6 when the “DAB+ radio via USB” row is also shown in Channel scan).

In the web interface: the /editor-canale page, on a phone or a computer. If the list is already open in a browser, the TV screen asks “Edit here, on the TV?”.

What you see on the screen

At the top, the title “Channel editor · TV” (or “· Radio”).

The row of modes: “Browse”, “Move”, “Copy”, “Select”, the current one in a coloured band, and how many changes are not saved (in Move mode also “in hand: N”).

On the left, the SOURCE column, with the source name at the top (for example “SOURCE · All channels”). Each channel has a mark on the right: “new” (found at the last scan), “hidden”, “locked”, “in the bouquet”, “FTA” or “encrypted”.

On the right, the BOUQUET column: first the list of bouquets (“BOUQUETS · TV”), each with its number of channels and, where needed, “locked” or “hidden”; once opened, the bouquet shows its channels, markers, sub-bouquets and empty rows, and at the top “BOUQUET”, its name and how many channels it has. A channel that is no longer in the receiver's list shows “no longer in the list”.

Below, the hint line (what OK, the arrows and the digits do now, or the message of the last operation, for example “Added: ...”) and the colour keys, whose text depends on the mode and the column.

Rows and settings

RowValuesDefaultWhat it does
Source (RED in the left column)All channels, Satellites, Providers, Transponders, Bouquets, SearchAll channelsWhere you take the channels from. A satellite, a provider or a transponder opens with OK. “Search” shows the channels that match the name you type (with the digits, as in text messages, or TEXT for the on-screen keyboard) and the filters.
Filters (BLUE in the left column)the channel database filters, new, locked, hidden, in no bouquet, without a logo, HD in the name, but an SD channelno filtersThey narrow the source to the channels that have all the chosen properties. The filters stay for the next time you open the editor, until the interface restarts. When you are looking, for example, for the new channels after a scan or for those that are in no bouquet.
The modesBrowse, Move, Copy, SelectBrowse“Browse”: you move through the lists. “Move”: the rows you picked up move with UP and DOWN (or to the position typed with the digits), OK drops them there, EXIT puts them back. “Copy”: you choose where the copy goes. “Select”: OK ticks the row and moves down, and the colour keys work on all the ticked rows.
The colour keys, by place and modeSource: Source / Add / Select / Filters, Bouquet list: Delete / Move / Select / New bouquet, In a bouquet: Delete / Move / Select / Bouquets, Move: Put back / Drop here / To the start / to the end / Move to…, Copy: Cancel / Drop here / To the start / to the end / Copy to…, Selection in the source: Deselect all / Add / Selection done / Select all, Selection in a bouquet: Delete / Move / Selection done / Copy to…In order: RED, GREEN, YELLOW, BLUE. The text at the bottom always shows what each key does now. Deleting a bouquet or a channel from a bouquet asks first; the channels stay in the receiver's list.
Saving and the backupsSave, Cancel, StayChanges are made in the editor first. You save them with MENU > Save now (or Ctrl+S on a keyboard) or when leaving, at the question “You have N changes. Save?”. After saving it says “Saved. Backup copy: ...”. From MENU > Backups you go back to a list saved earlier (“The list went back to the chosen copy.”).

Keys

UP / DOWNThe row above or below; in Move, they move the rows you picked up.
LEFT / RIGHTThe left or right column (in Move and Copy: one page).
CH+ / CH-One page up or down.
OKIn the source: adds the channel to the bouquet, after the row selected there (on a folder: opens it). In the bouquet: picks up the row to move it (on a bouquet: opens it). In Move and Copy: drops the rows here.
Digits 0-9In the bouquet: the position (the rows you hold go there). In the source: the name, as in text messages, for searching.
< / >Undo the last change / redo the undone change.
RED / GREEN / YELLOW / BLUEWhat is written at the bottom, by mode and column.
MENUThe rest of the actions, for the selected row and for the whole list.
INFOChannel details.
TV / RADIOSwitches to the TV list or the radio list.
TEXTThe on-screen keyboard, for the name you search for.
EXITGoes up one level or puts back what is in hand; at the top level it leaves, with the question about unsaved changes.
HELPOpens this help page; there, BLUE shows the list of the editor's keys. MENU > Editor help opens the help from within the editor.
MouseClick chooses the row and the column, Ctrl or Shift + click ticks, double click is OK, dragging moves within the bouquet or adds from the source, the wheel scrolls the column.
KeyboardCtrl+C / X / V, Ctrl+Z / Y, Ctrl+A, Ctrl+S, Delete, Tab, Page Up / Down, Home / End, Shift + arrows (ticks), Ctrl + arrows (moving), F2 (rename); letters typed in the source search.

Step by step

Making a new bouquet with your channels

  1. Press MENU 1 5 (or MENU 1 6).
  2. Press RIGHT to reach the list of bouquets, then BLUE (“New bouquet”) and type the name.
  3. Open the new bouquet with OK and press LEFT, into the source.
  4. On each channel you want press OK: it is added to the bouquet. Type the beginning of the name with the digits to find it quickly.
  5. Press EXIT until you leave and choose “Save”.

Moving a channel higher in a bouquet

  1. Open the bouquet and move the cursor to the channel.
  2. Press OK: the channel is “in hand” (Move mode).
  3. Press UP to the place you want (or type the position with the digits) and press OK.

Going back to the previous list

  1. Press MENU and choose “Backups”.
  2. Choose the copy with the day and time you want.
  3. The list goes back to the chosen copy.

You delete a satellite from the satellite list (from 0.7.7)

  1. Press MENU, go down to “Advanced” and press OK.
  2. Choose “Delete a satellite from the list…” and then the satellite.
  3. Read the question “Delete ... from the satellite list? It will no longer be restored automatically.”: below it says from which tuners it is removed and that the interface will restart after the deletion.
  4. Choose Yes. If the editor has unsaved changes, the interface does not restart, and the satellite disappears everywhere after the next interface restart.

Problems and solutions

It says “The list is now open in the web interface: here you can only look at it.”

The list is edited from one place. When opening, answer Yes to “Edit here, on the TV?” to take over the editing, or finish in the browser.

It says “Editing has moved to the web interface. The editor here closes.”

Someone took over the editing from a browser. What you saved remains; continue there or open the editor again.

It says “The channel list is empty. Search for channels from the Scan menu.”

The receiver has no channels yet. Do a scan from Channel scan, then open the editor.

It says “The list was not saved. The changes are still here: try again.”

The changes are not lost: try again with MENU > Save now.

I deleted a channel or a bouquet by mistake.

Press < (undo) straight away. After saving, you go back to the previous list from MENU > Backups.

A channel in a bouquet shows “no longer in the list”.

The channel is no longer in the receiver's list (for example after a scan). MENU > Channels that no longer exist shows all of them.

I deleted a satellite from the list and it came back after a restart.

Up to 0.7.6 the receiver put the image satellites back at start. From 0.7.7 a deleted satellite stays deleted; to bring it back, MENU > Advanced > “Restore the satellites from the image (N)” (the row appears while satellites of the image are missing).

Related topics