Network fallback tuner
Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.
What it is for
When this receiver's tuners are busy (for example with recordings) or cannot receive the channel (the receiver has no cable or terrestrial tuner for it, the satellite is not connected), the channel comes over the network from another receiver at home, with its tuners.
The receivers at home are found by themselves: you choose one from the list and that is all. The info bar, the guide, the logo and the channel list show the channel as usual.
The channel must also be in this receiver's channel list: the list and the guide are not taken from the receiver at home. Recordings and the second window (PiP) do not use the fallback.
The TV of the receiver at home comes first: when it needs the tuner lent to you, the stream stops, and here the picture comes back by itself when a tuner is free there again.
How to get here
Path: Main menu > Settings > Tuners and scanning > Network fallback tuner (the second row).
Keys on the remote: MENU 6 5 2.
Also from here: the last row of “Tuner settings” shows the state (Off or the chosen receiver); OK on it opens the same screen.
In the web interface: the /setari?id=hds_tuner_rezerva page and the tuners card in /antena/tuner.
What you see on the screen
A settings screen titled “Network fallback tuner” with a single row of the same name; the “Receiver address” row appears only when you choose “Other address”.
Above the explanation at the bottom, the state: “Searching for receivers on the home network...”, then “Receivers found on the home network: …” or “No other receivers were found on the home network. If you know the address, select Other address and enter it.”, which receiver is used and the last start through the fallback (“Last used at …: … was streamed from …”).
At the bottom, the usual settings keys: RED “Cancel”, GREEN “Save”.
Rows and settings
| Row | Values | Default | What it does |
|---|---|---|---|
| Network fallback tuner | Off, each receiver found at home, Other address | Off | The receiver the channels come from when this receiver's tuners are busy or cannot receive the channel. The list has the receivers found by themselves at home, with their .local names (which do not change when the router gives another address). A receiver chosen before but not found now appears with “(not currently detected)”. Off: the channel does not start, as before. When you have a second receiver at home and want to watch a channel even though this one's tuners are busy, or a channel only the other one can receive. |
| Receiver address | the .local name or the address of the receiver at home | empty | Appears only with “Other address”: the receiver at home that provides the channels, for example hdsatelit2.local. Port 8001 is added by itself; type another port after a colon. When the receiver at home does not appear in the list by itself (for example it does not announce its stream server). |
Keys
| LEFT / RIGHT | On the “Network fallback tuner” row: go through Off, the receivers found and Other address. |
| OK | On the tuner row: the list of choices. On “Receiver address”: the keyboard. |
| GREEN (Save) | Keeps the choice and closes the screen; it is used from the next channel change. |
| RED (Cancel) or EXIT | Closes without saving. If you changed something, it asks first. |
| HELP | Opens this help page. |
Step by step
Taking the channels from the second receiver at home
- Press MENU 6 5 2 and wait for the status line: “Receivers found on the home network: …”.
- On the “Network fallback tuner” row, choose the receiver at home with LEFT or RIGHT.
- Press GREEN. When this receiver's tuners are busy, the channel comes from the chosen one.
Problems and solutions
No receiver is found at home.
The other receiver must be on, on the same network, with its stream server open to the home network. On an HD Satelit receiver, its “Streams for other devices on the home network” row (Menu > Conditional access > Stream Relay) is on by default. If it still does not appear, choose “Other address” and type its .local name.
The chosen receiver appears with “(not currently detected)”.
It does not answer now (it is off or on another network). The choice stays; the channels come from it when it answers again.
The channel still does not start when the tuners are busy.
The channel must also be in this receiver's list, and the other receiver must have a free tuner that can receive it. The picture comes by itself when a tuner is free there.
Related topics
- Tuner settings
- Tuners and scanning
- Stream Relay
- Matching web page: /setari?id=hds_tuner_rezerva.
Differences between receivers
Since 0.7.7, the same on all receivers. The receiver at home can be another HD Satelit receiver or any Enigma2 receiver that streams the channels on port 8001.