Releases

Help / Updates, safety, information and power / Remote assistance

Remote assistance

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

“Remote assistance” lets the people at HD Satelit see, over the internet, the technical state of your receiver, so they can find and fix image defects on your model faster.

It is off from the factory and only you turn it on, each time again. The receiver does not need it to work.

While it is on, the HD Satelit team sees the screens, settings and channel picture and can control the receiver through all menus, but it does only what is in the fixed list of requests. User names, passwords, PINs and keys do not reach the team. Each request from the team appears on your screen, in the assistance log.

Start turns it on for 2 hours. You can stop it at any time, from the receiver or from the web page, and at the end of the time it stops by itself. While it is on, a sign is shown at the top of the screen.

When the team connects, the receiver first makes a copy of the settings; with “Put it back as it was” you restore it at any time, also after it has stopped.

The same page is in the web interface, at /asistenta.

How to get here

Path: Main menu > Settings > Remote assistance (the last row in Settings).

Keys on the remote: MENU 6, then UP once (from the first row, the cursor goes to the last one) and OK.

The row appears only when the image can check the signature of the team's requests.

In the web interface: the /asistenta page, with the same text, the same tick and the same Start (it starts immediately, with the same 2-hour duration); the start is also announced on the receiver.

What you see on the screen

While assistance is off, the start page opens: the short text (“The HD Satelit team sees the screens, settings and channel picture...”), the row ticked in advance “I accept the terms and conditions” and, below it, “OK on the row above: the terms and conditions.” At the bottom: RED “Back”, GREEN “Start”.

OK on the ticked row opens “Terms and conditions”: the full text, to read with UP and DOWN (what the team sees, what data reaches HD Satelit, how long it is kept and how you stop it).

While assistance is on, the screen shows at the top until when it is on (“On until ...”) and below it the log: each request from the team and the answer. Until the team connects it shows “We will let you know when we connect. You can use the receiver in the meantime.” At the bottom: RED “Stop”.

When they exist, also at the bottom: YELLOW “Latest conclusions” (what the team found and did) and BLUE “Put it back as it was”; the first line of the text then shows “Settings copy made when the team connected: ...”.

Outside this screen, while assistance is on, a strip at the top of the screen shows that it is on and until when; while the team is working, “HD Satelit is now working on your receiver”. When the team connects, “The HD Satelit team has connected. You can use the receiver as usual.” appears.

From 0.7.7, while assistance is on, the team can ask you a question on the TV: the “Question from HD Satelit” window, with Yes and No (No is selected) or with 2-4 options from the team, and a time to answer. The same question also appears on the /asistenta web page. You choose with the arrows and OK, and the answer goes to the team; the first answer, from the TV or from the web, closes it everywhere. If the time runs out, you press EXIT or you stop the assistance, the team learns that you did not answer: silence does not mean Yes.

Rows and settings

RowValuesDefaultWhat it does
I accept the terms and conditionsticked, not tickedtickedWith the row ticked, Start confirms that you agree with the terms and that you are at least 16 or have a parent's consent. Without the tick, Start starts nothing and says “Without the tick, assistance does not start.” LEFT and RIGHT change the tick.
Duration2 hours2 hoursStart turns assistance on for 2 hours, without other questions. At the end it stops by itself. Once on, it stays on also after the interface or the receiver restarts, until the end time.
The assistance logEach request from the team and the receiver's answer, in order. The log is deleted when you stop assistance.
Put it back as it wasYes, NoNoWhen the team connects, before any change, the receiver makes a copy of the settings. BLUE puts it back: the channels, settings and network from that moment. It asks first (No is selected), then the interface restarts. The copy remains after assistance stops. When after assistance something is no longer the way you wanted it.
Latest conclusionsThe “What we found and what we did” window, with what the team wrote at the end and the thanks. It appears by itself when the conclusions arrive; YELLOW opens it again, also after stopping.

Keys

GREENOn the start page: “Start”, turns assistance on. When it could not start because of the internet: “Internet settings”.
REDWhile it is on: “Stop”, stops it immediately, without a question, and closes the screen. Otherwise: “Back”.
OKOn the start page: opens “Terms and conditions”. After an internet error: opens the network settings.
LEFT / RIGHTOn the start page: tick or untick “I accept the terms and conditions”.
UP / DOWNScroll the log or the text of the terms and of the conclusions (“Up/Down: full text”).
YELLOW“Latest conclusions”, when there are any.
BLUE“Put it back as it was”, when there is a copy made when the team connected.
EXITCloses the screen; assistance stays as it was (on or off).
HELPOpens this help page.

Step by step

Turning assistance on so HD Satelit can help you

  1. Press MENU 6, then UP and OK.
  2. Leave “I accept the terms and conditions” ticked (OK on it shows you the terms) and press GREEN, “Start”.
  3. Tell the forum or the person helping you that you have turned assistance on. You can use the receiver in the meantime; when the team connects, a notice appears on the screen.
  4. Leave it on for at least 30 minutes if nobody connects right away.

Turning assistance off

  1. Press MENU 6, then UP and OK.
  2. Press RED, “Stop”. Assistance stops immediately.

Putting the settings back as they were before assistance

  1. Open the assistance screen.
  2. Press BLUE, “Put it back as it was”, and answer Yes to the question.
  3. The interface restarts with the settings from the copy.

Problems and solutions

It says “Assistance cannot start: the receiver has no internet access.” (or that the cable, the Wi-Fi or the DNS is the problem).

The receiver cannot reach the HD Satelit server. Press GREEN (“Internet settings”), fix the network, then start again.

It says that the secure HTTPS connection was refused.

Check the receiver's date and time; if they are correct, try again later.

It says that the HD Satelit server has a temporary problem or refused the request.

Try again later.

I turned assistance on, but nobody connected.

The team may be helping someone else right then. Leave it on for at least 30 minutes; you will see the notice when they connect.

I have to type a password or a key while assistance is on.

Stop assistance, type and save, then turn it on again if it is still needed.

The screen says “The function is not available in this image.”

The image cannot check the signature of the team's requests, so assistance does not start. Update the image from Software update.

Related topics