Logs of the other slots
Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.
What it is for
On a receiver with several images, each in its own slot, it can happen that the image in another slot does not start. What it managed to write (the steps of its starts, the reports of failed starts and the crash logs) stays in its slot, where you cannot reach it from the image that works.
This screen finds the other slots by itself, shows what it found in each one and, with a single press, makes one report with everything they left, puts it on the USB stick and sends it to HD Satelit, so we can find out why that image does not start. You have nothing to choose.
The other slots are only read; nothing in them is changed. Lines with passwords, keys, user names, Wi-Fi networks and serial numbers do not go into the report; internet and e-mail addresses are hidden, and only the first two numbers of IP addresses remain.
The same search and the same button are in the web interface, on the /jurnale-sloturi page.
How to get here
Path: Main menu > Settings > System & Devices > Logs of the other slots (the third row from the bottom, after Crash logs).
Keys on the remote: MENU 6, then UP until “System & Devices” (twice, or three times when “Remote assistance” is also in the list) and OK; then UP three times and OK.
The row is shown at every menu level, also with “Setup Mode” set to Simple.
In the web interface: the /jurnale-sloturi page.
What you see on the screen
At the top, the title “Logs of the other slots”.
Below the title, in a box, the explanation: “If an image in another slot does not start, here you get the steps of its starts, the reports and the crash logs left there. One press puts them on the stick and sends them, so we can find out why it does not start.”
The label “What I found in the other slots” and, below it, one row per slot: the name of the slot, the image in it with its version, then how many starts, reports and crash logs were found (for example “starts 3, reports 1, crash logs 2”). While it searches, it shows “Looking for the other slots...”.
Below a line, the result of putting the report on the stick and sending it. To its right, when the report has gone, the label “Report code” and the code, large, in yellow.
At the bottom, the keys: RED “Close” and GREEN “Put on the stick and send”. The green button appears only when at least one slot has been found.
Rows and settings
| Row | Values | Default | What it does |
|---|---|---|---|
| A slot in the list | the name of the slot, the image and its version, starts, reports, crash logs | The receiver looks for the other images in the multiple boot folders (linuxrootfs1, linuxrootfs2 and so on) on every mounted memory, in the parts of the internal memory that are not mounted (it mounts them read only while it searches) and on the disks. Next to each one it shows how many starts the image noted, how many failed start reports and how many crash logs it has. | |
| What goes into the report | the steps of the last 3 starts, the last 3 reports, with their codes, the last 3 crash logs, the crash journal | One report for all the slots found: for each one, the image version and the model, the steps of the last three starts, the last three reports, the end of the last three crash logs and the end of the crash journal. The report stays in the receiver (the last 3 are kept), is put on every connected USB stick, in the hds-raport folder, and is sent to HD Satelit. | |
| The result (below the line) | Put on the stick, in the hds-raport folder., No stick is plugged in: the report stayed in the receiver., Sent. The code of the report: ..., I could not send it now: the report goes by itself at the next start, when the receiver has a network. | The first line says whether the report reached the stick, the second whether it has gone. When it has gone, the report code (6 digits) also appears large on the right, under “Report code”. Without a network, the report waits in the receiver and goes by itself at a later start, when the receiver has a network. |
Keys
| GREEN or OK | Put on the stick and send: makes the report with everything the other slots left, puts it on the stick and sends it. While it works it shows “Putting the logs on the stick and sending them...”. It does nothing when no slot has been found or when it is already working. |
| RED or EXIT | Closes the screen and takes you back to System & Devices. |
| HELP | Opens this help page. |
Step by step
Sending HD Satelit the logs of an image that does not start
- Start the receiver in the HD Satelit image, the one that works.
- Plug a USB stick into the receiver, so you also keep a copy of the report.
- Press MENU 6, go to “System & Devices” and open “Logs of the other slots”. Wait until “Looking for the other slots...” disappears.
- Check that the slot of the image that does not start is in the list and press GREEN.
- Write down the report code on the right and give it on the forum or in your message to HD Satelit, with the receiver model.
Doing the same from a phone or a computer
- Open the receiver's web interface and the /jurnale-sloturi page.
- Wait for the list of slots, then press “Put on the stick and send”.
- The result and the report code appear below the button.
Problems and solutions
It says “I found no other slots on this receiver.”
The receiver has no other image in a multiple boot folder or on a disk it can read. If the image that does not start is on a USB stick or a disk, connect it to the receiver and open the screen again.
The green button is missing.
The button appears only when at least one slot has been found. Without slots there is nothing to send.
It says “No stick is plugged in: the report stayed in the receiver.”
The report was made and sent (if the receiver has a network), but you do not have the copy on a stick. Plug in a stick and press GREEN again.
It says “I could not send it now...”.
The receiver has no network or the server did not answer. The report stays in the receiver and goes by itself at a later start, when the network works. You can also send the copy from the stick yourself.
It says “The report program is missing from this image.”
The image that is running does not have the program that makes the reports. Update the HD Satelit image from Software update.
It says “I could not make the report.”
The receiver could not write the report to its internal memory. Try again; if it happens again, check the free space of the internal memory in Storage & Disks.
Related topics
- Crash logs
- System Log Viewer
- Software update
- Storage & Disks
- System & Devices
- Matching web page: /jurnale-sloturi.
Differences between receivers
Other slots appear only on receivers with several images (multiple boot) or with an image on a disk. On a receiver with a single image, the list says it found no other slots.