Releases

Help / Updates, safety, information and power / New image from the internet

New image from the internet

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

“New image from the internet” puts the new version of the HD Satelit image on the receiver, taken directly from the internet, with a single press: GREEN, “Yes, update”. The receiver does the rest, and the window only shows how far it has got.

Your channels and settings stay. Before the installation, the receiver makes a full copy of the settings on the USB stick and, at the first start after the installation, puts it back by itself.

Everything is prepared on the stick: the image is downloaded only there, and the internal memory is not touched until the actual writing. The image list must be signed by HD Satelit, and the image must be made for your model; at any mismatch the receiver stops without writing anything.

When there is only a new version of the packages, not of the whole image, the same window installs it without a stick, and the interface restarts by itself when the receiver is idle.

The window also appears by itself when there is a new version. The same status and the same button are in the web interface, on the /imagine-online page.

How to get here

Path: Main menu > Settings > Software & Firmware > New image from the internet (the third row).

Keys on the remote: MENU 6 7 3.

By itself: 5 minutes after start-up and then once a day, the receiver looks for a new version; if it finds one, the window appears on the normal screen, once per start-up. “Not now” closes it until the next start-up.

In the web interface: the /imagine-online page, with the same question, the same progress and the same standby setting. What you start from the page can also be seen on the TV.

What you see on the screen

A window in the middle of the screen, titled “New image from the internet”.

At the top, the main sentence: when there is a new version, “There is a new image for your receiver: ... You now have ... Shall I install it now? Your channels and settings stay.”, with the versions and their dates; otherwise the status, for example “You have the newest image for your receiver.” or “Looking for the new image...”.

Below it, the current step (“Downloading the image to the stick: 45% (300 of 650 MB).”) or a message; opened from the menu and with nothing running, this line shows the “Update by itself in standby: ...” setting.

At the bottom, up to four keys: GREEN “Yes, update”, RED “Not now” (or “Stop” while it works, or “Close”), YELLOW “Other images” (only when a plugin has added other images) and BLUE “Change” (only when opened from the menu).

Rows and settings

RowValuesDefaultWhat it does
The steps after “Yes, update”Looking for the new image..., Downloading the image to the stick: ...%, Checking the image on the stick..., Preparing the image on the stick..., Making the full copy on the stick..., Checking everything before installation..., The image is now being installed.The receiver reads the signed list, downloads the image to the stick (an interrupted download continues from where it stopped), reads it back and checks it, prepares it, makes the full copy of the settings on the stick, checks everything once more and only then writes it. During the writing: “Do not turn off the receiver: it will restart automatically, and your channels and settings will be restored automatically.”
Waiting for a recordingInstallation is waiting for the recording to finish and will start automatically.The writing does not break a recording: if something is being recorded now or a recording starts in the next 15 minutes (one hour, in standby), the receiver waits and starts by itself afterwards.
A new version of the packagesThere is a new version for your receiver: ...When only part of the programs is new, not the whole image, “Yes, update” installs them without a stick: “Installing update. Channels, settings and plugins are kept. Interface restarts automatically when receiver is idle.”
Update by itself in standby (BLUE)the image and the packages, only the image, only the packages, offthe image and the packagesWhat the receiver installs by itself while in standby: two minutes after it goes into standby it tries, if the setting allows it, if nothing is being recorded now or in the next hour and, for the whole image, if a stick with enough space is plugged in. Each press of BLUE moves to the next value. Choose “off” when you want to decide every update yourself.
Other images (YELLOW)UnverifiedIt appears only when an installed plugin has added images that are not HD Satelit images. Each one has the “Unverified” state. GREEN or OK on one opens the “Not an HD Satelit image” warning, with “No” selected: we do not know whether it is compatible with the receiver; if it is not made for the model, the receiver may be left unable to start until it is recovered from a USB stick; if you install it, it replaces the HD Satelit image, and the settings and the channel list are copied to the stick first. They are never installed by themselves, not even in standby.

Keys

GREEN or OK“Yes, update”: starts the update shown. When the window appears by itself, the keys do not respond for the first second and a half, so that a key pressed at that moment for something else does not start anything.
RED“Not now”: closes the window. During the download and the checks: “Stop”, stops the work, and the file already started stays on the stick. During the writing it does nothing.
EXITOnly closes the window; work that has started goes on and is shown again when you reopen the window or on the web page.
YELLOW“Other images”: the list of images added by a plugin (only when there are any and only from the menu).
BLUE“Change”: moves the “Update by itself in standby” setting to its next value (only from the menu, with nothing running).
HELPOpens this help page.

Step by step

Installing the new image from the internet

  1. Plug a USB stick with free space into the receiver (its name without spaces, for example HDSATELIT).
  2. Press MENU 6 7 3 (or wait for the window that appears by itself).
  3. Read the versions and press GREEN, “Yes, update”.
  4. Leave the receiver on. At the end it restarts by itself, and the channels and settings come back by themselves from the stick.
  5. Leave the stick in the receiver until after the first start-up, so the settings are put back.

Turning off the automatic updates in standby

  1. Press MENU 6 7 3.
  2. Press BLUE until the bottom line says “Update by itself in standby: off”.
  3. Press RED or EXIT.

Problems and solutions

It says “Plug in a USB stick and press again.”

The whole image is downloaded only to a stick. Plug in a stick and press GREEN again; the window stays open.

It says “There is not enough room on the stick: ... MB free are needed.”

Free some space on the stick or use a bigger one, then press GREEN again.

It says the stick's name contains spaces or characters.

Rename the stick on your computer (for example HDSATELIT), plug it back in and press again.

It says “The receiver is now running from a stick or from an unknown place...”.

The receiver writes the image by itself only to the place it runs from, when that is its own memory. Get the image from the website and install it with New image from USB stick.

It says “The internet connection was lost.” or “Stopped. Nothing has been installed.”

Nothing has been written. Press GREEN again: the download continues from where it stopped.

It says “The update server is not answering now.” or “The new image cannot be found on the server.”

Try again later.

It says “The downloaded image does not match.”, “The image is not for this receiver.” or “The image list is not signed by HD Satelit.”

The receiver stopped before writing: nothing has been installed. For the first one, press again to download it again; for the others, write to us on the forum, giving the receiver model.

It says “The settings could not be backed up to the USB stick.” or “The USB stick has been removed or has an error.”

Without a good copy nothing is installed. Check the stick (or use another one) and press again.

After the installation it says “Insert USB stick used during installation. Settings will be restored automatically.”

The copy of the settings is on the stick used during the installation. Plug it into the receiver: the settings are put back by themselves.

It says “The new image was not installed. The receiver is still running ...”.

At start-up, the version was not the one written. The receiver stayed on the previous version, with your channels and settings. Try again later or write to us on the forum.

Related topics