Releases

Help / Updates, safety, information and power / Full copy of the image

Full copy of the image

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

Makes a copy of the whole image on the receiver on a USB stick or disk: the system, the channels, the settings and the plugins, exactly as they are now.

The copy has the same form as the images on the website and is put back with “New image from USB stick”, which checks it the same way. After that the receiver is exactly as it was when the copy was made.

The receiver does not stop while the copy is made: you can keep watching, and the copy only reads from the receiver.

How to get here

Path: Main menu > Settings > Software & Firmware > Full copy of the image (the fifth row, below “Settings copy”).

Keys on the remote: MENU 6 7 5.

In the web interface: the /copie-imagine page.

What you see on the screen

At the top, the title “Full copy of the image”. On the left three rows: “Make the copy now”, “Copy location” (the chosen stick or disk, with its free space, or “no USB stick or disk”) and “Search again”.

On the right, what the copy does and where it goes, plus “The copy also has the passwords (Wi-Fi, web interface, access modules), so keep the stick like a key.”

While the copy is made: the step (“Step 1 of 3”, “Step 2 of 3”, “Step 3 of 3”), the percentage, the time left and “Do not remove the stick until it says “The copy is ready”.”

At the bottom, the help line of the selected row and the keys: RED “Back”, GREEN “Make the copy” and, while it works, YELLOW “Stop the copy”.

At the end: “The copy is ready: ...” with the file name, the size and how long it took.

Rows and settings

RowValuesDefaultWhat it does
Make the copy nowOK starts the copy in the chosen place. While it runs, the row says “in progress…”.
Copy locationthe USB sticks and disks foundthe one with the most free spaceWhere the copy is written. The place with the most free space is chosen by itself; LEFT, RIGHT or OK changes it. When you have several sticks or disks and want the copy on another one.
Search againSearches for the sticks and disks again. The list also updates by itself when you insert or remove one.

Keys

UP / DOWNChoose the row.
OK or GREENOn “Make the copy now”: starts the copy. On “Copy location”: another stick or disk.
LEFT / RIGHTOn “Copy location”: another stick or disk.
YELLOWWhile it works: stops the copy and deletes the started file; nothing changes on the receiver.
EXIT, Back or REDCloses the screen. A copy that has started continues, and a message appears at the end.

Step by step

Making a copy of the whole image

  1. Insert a USB stick or disk with free space (about as much as the system on the receiver).
  2. Press MENU 6 7 5. Your stick must appear at “Copy location”.
  3. Press GREEN. Wait for “The copy is ready”; meanwhile you can leave the screen and keep watching.
  4. Keep the stick safe: the copy also has the passwords.

Putting the copy back

  1. Insert the stick with the copy into the receiver.
  2. Press MENU 6 7 2 (“New image from USB stick”): the copy appears as “Full copy from ...”.
  3. Choose it and confirm. The receiver is installed exactly as it was when the copy was made; there is nothing left to restore afterwards.

Problems and solutions

“Copy location” says “no USB stick or disk”.

Insert a USB stick or disk; the list updates by itself. If it does not appear, press OK on “Search again” or try another USB port.

It says “Not enough space on the stick: the copy needs about ...”.

Make room on the stick or use a bigger one.

It says “On Vu+ receivers the full copy of the image cannot be made yet.”

On Vu+, make a settings copy (MENU 6 7 4): it keeps the channels, settings and plugins, and you get the image from the website.

It says “The copy on the stick cannot be read back” or “Writing to the stick failed”.

The stick has a problem. Try again, on another stick.

I stopped the copy with YELLOW.

The started file was deleted and nothing changed on the receiver. Start it again whenever you want.

Related topics

Differences between receivers

Works on Amiko Viper 4K V10, V20, V30, V40, Octagon SF8008 and SF8008 MINI, Uclan Ustym 4K PRO, GigaBlue Trio 4K and Protek 4K X2. On Vu+ receivers it is not possible yet: there the screen tells you to make a settings copy.