Releases

Help / Radio, DAB+ and DVB-T2 via satellite / Abertis feeds from 30°W

Abertis feeds from 30°W

Screenshots are being added: so far 0 from the receiver and 0 from the web interface; the aim is at least 5 of each, with arrows and frames, and, where a setting changes what you see, a before and after comparison.

What it is for

On the 30°W satellite (Hispasat), the terrestrial transmitters in Spain receive whole television and radio multiplexes, each one carried inside a single PID of a transponder: the Abertis distribution feeds. An ordinary receiver only sees a data service there, with no picture and no sound.

The HD Satelit image unpacks these feeds by itself. After an ordinary scan on 30°W, their channels appear in the channel list, under TV, in the “Abertis 30°W” folder, with no extra step and nothing to install.

Each feed appears with the name of the multiplex and the names of its channels. You start them with OK, like any channel, and move from one to the next with CH+ and CH-.

The receiver's list has all 38 feeds known on 30°W, with the channel names (from version 0.6.19). The channels of a feed go into the folder only when the receiver locks on to its transponder.

How to get here

Path: DOWN (TV list), then GREEN (“Satellites”), then DOWN to the end of the list, to the “Abertis 30°W” row, and press OK.

For the folder to fill up, the dish must be pointed at 30°W. An ordinary scan on 30°W is enough (Menu > Channel scan > Satellite): when it ends, the folder and its channels are created automatically, in the background.

For a single transponder: Menu > Channel scan > Satellite > DVB-T2 via satellite, on the “Provider” row one of the “Abertis …” providers (for example “Abertis 11222 H”), then “Search now”.

In the web interface: the /canale page (the folder appears among the bouquets).

What you see on the screen

In the TV list under “Satellites”, after the last satellite, comes the “Abertis 30°W” folder, right after “DVB-T2 from satellite”.

With the cursor on the folder, the panel on the right says “Spanish terrestrial channels received from satellite”, how many channels the folder has and how it fills up.

An empty folder says: “Spanish terrestrial channels received from satellite appear here. The list is empty: you have not searched on 30°W yet.” It also says where to find the search.

In the folder, each feed starts with a title row “MUX DVB-T2: <multiplex name>”, followed by its TV and radio channels.

When a channel starts, there may be no picture for the first few seconds: the receiver tunes to the transponder and starts unpacking the feed.

Rows and settings

RowValuesDefaultWhat it does
The “Abertis 30°W” folder (TV list)with channels, emptynot in the list until the first scan on 30°W that finds feedsHolds the channels of the Abertis feeds the receiver has found, grouped by multiplex. OK on a channel starts it. The order, the names you changed and the channels you added to Favourites stay after a new scan. It fills up by itself after every scan on 30°W.

Keys

GREEN (in the channel list)“Satellites”: the list by satellite; the “Abertis 30°W” folder is at its end, after “DVB-T2 from satellite”.
OKOn the folder: opens it. On a channel: starts it and closes the list.
< / >In the folder, jump to the previous or next “MUX DVB-T2: …” title row.
CH+ / CH- (while watching)The next or previous channel in the folder.

Step by step

Put the channels in the list

  1. Check that the dish is pointed at 30°W (fixed or motorised).
  2. Go to Menu > Channel scan > Satellite and scan 30°W: the whole satellite or only one transponder with these feeds, for example 11222 H.
  3. When the scan ends there is nothing else to do: the “Abertis 30°W” folder is created automatically, with the channels of the feeds the receiver found.

Watch a channel

  1. Press DOWN (TV list), then GREEN (“Satellites”).
  2. Go DOWN to the end of the list, to “Abertis 30°W”, and press OK.
  3. Choose the channel and press OK. The first start can take a few seconds, longer if the dish has to turn.

Problems and solutions

I cannot see the “Abertis 30°W” folder.

The folder appears after the receiver locks on to a transponder with these feeds on 30°W. Scan 30°W (Menu > Channel scan > Satellite) or search with “DVB-T2 via satellite” for an “Abertis …” provider.

A feed is missing from the folder.

The channels of a feed go into the folder only when the receiver locks on to its transponder. Check the signal on that transponder and scan it again.

The channel is slow to start.

The first time you start the channel, the receiver tunes to the transponder of the feed and starts unpacking it; with a motorised dish it takes longer.

Related topics