The r1 archive for the first Amiko Viper 4K (V10): the picture reaches the TV
27 October 2026
On some V10 receivers with image 0.6.6, the interface, the sound and the channel search worked, but the TV did not show the picture of the channels. The cause: the program that shows the start-up logo held the video decoder, and the board program that takes the picture to HDMI did not start as in the usual software for this receiver. A tester confirmed the cause.
The r1 archive (version 0.6.8) fixes it: the board program for the picture starts before the interface, and the start-up logo stops in time. r1 also has the diagnostic screen, which appears only when the start fails.
If you already have 0.6.6: Main menu > Settings > Software & Firmware > Software update (keys MENU 6 8 1), then restart the whole receiver (off and on), not only the interface. If you want everything new, write the r1 archive from a USB stick; the steps are on the receiver page.
r1 has not been tried on a real V10 yet. Tell us on the image forum or at [email protected] whether the picture appears on the TV.