HD Satelit image 0.6.0 alpha, for testers only, on the Amiko Viper 4K V30
24 October 2026
HD Satelit image 0.6.0 can now also be downloaded for the Amiko Viper 4K V30, as an alpha, for testers only. Alpha means the image is made for this receiver, but it has not been tried on the receiver itself yet: it may not start.
The V30 has the same processor, the same kernel and the same drivers as the Amiko Viper 4K V20, on which image 0.6.0 is tested as a beta. Only the kernel and the system are written; the receiver's start-up stays untouched, so the receiver can be restored from a USB stick with the manufacturer's image.
The archive is only for the V30 and is installed from a USB stick, as on the V20. The receiver's page has the risks, the steps, a short list of tests for the tester and the recovery. Make a copy of your settings and channel list first.
Do you have a V30 and have you tried the image? Write to us at [email protected] what worked and what did not, with the logs and a photo of the note shown at the first start. The HD Satelit blog also has an article, in Romanian, about the image for testers.